Sunsource ® Home Energy System; Sound Cover (Sr1) Disassembly And Assembly - Lennox XP17-024-230-01 Installation And Service Procedure

Table of Contents

Advertisement

Indoor Coil
1. Clean coil if necessary.
2. Check connecting lines, joints and coil for evidence of
oil leaks.
3. Check condensate line and clean if necessary.
WARNING
This product and/or the indoor unit it is matched with may
contain fiberglass wool.
Disturbing
the
insulation
maintenance, or repair will expose you to fiberglass wool
dust. Breathing this may cause lung cancer. (Fiberglass
wool is known to the State of California to cause cancer.)
Fiberglass wool may also cause respiratory, skin, and
eye irritation.
To reduce exposure to this substance or for further
information, consult material safety data sheets available
from address shown below, or contact your supervisor.
Lennox Industries Inc.
P.O. Box 799900
Dallas, TX 75379-9900
Locations with Possibility of Heavy Snow or
Freezing Rain Accumulation
Heavy snow and/or freezing rain can interfere with the
performance of the outdoor fan assembly. Lennox
recommends use of the optional snow guard (X8782) in
these areas.
Figure 16. Snow Guard Top Cover — X8782
Accessories
For update-to-date information, see any of the following
publications:
Lennox XP17 Product Specification bulletin
D
XP17
during
installation,
Page 38
Lennox Product Catalog
D
Lennox Price Book
D
®
SunSource
Home Energy System
This Dave Lennox Signature
factory-equipped
with
®
SunSource
solar-ready. These units can be matched with
solar modules and other optional equipment so that they
can become part of a SunSource
Units can be upgraded for use with solar equipment at the
time of installation or in the future.
Solar energy is first used to meet cooling/heating
demands. When the outdoor unit is not operating, the
system powers lighting, appliances and other electronic
devices in the home. Any surplus power is sent back to the
utility company for a possible credit (check with your local
utility company for availability).
The SolarSynct package consists of the following
components:
®
Lennox
Solar Subpanel installed in a Dave Lennox
D
®
Signature
Collection air conditioner or heat pump
unit.
Solar modules (1 to 15 may be used to vary the amount
D
of electricity generated).
Envoy Communications Gateway monitors solar
D
power performance.
All components must be ordered separately. See the
Lennox
XP17
Product
®
SunSource
Home Energy System component ordering.
Wiring runs from the roof-mounted solar modules to the
outdoor unit. From there, power travels to the home
electrical service panel using the existing outdoor unit
power wiring.
®
Collection heat pump is
components
that
make
®
Home Energy System.
Specification
bulletin
it
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents