Advertisement
HYUNDAI GENESIS COUPE 2010
ISO DIN HEAD UNIT PROVISION
1
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2
Attach the ISO brackets to the after-
market radio (figure A), then secure
the assembly to the pocket using the
(4) supplied Phillips screws (figure B).
3
Mount the assembly into the sub
dash.
4
Reassemble dash in reverse order of
disassembly using the 99-7339 trim
panel instead of the factory trim
panel.
99-7339 KIT ASSEMBLY
3
A
B
Advertisement
