Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Metra Electronics Manuals
  4. Automobile Accessories
  5. 99-7390B
  6. Installation instructions manual

Metra Electronics 99-7390B Installation Instructions Manual

Kia sportage(with nav) 2017-2018
Hide thumbs

Advertisement

Quick Links

Download this manual
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Climate display • E) (2) #8 x 3/8" Phillips screws • F) Wiring harness (not shown)
A
B
Metra. The World's Best Kits.
®
Kia Sportage
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Includes an AX-CAM6V, antenna adapter, and wiring harness for a
complete installation
C
MetraOnline.com
2017-2018
(with NAV)
D
E
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-7390B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ...................................................4-6
Kit Assembly ..........................................................7
Wiring Instructions ........................................... 8-15
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Interface and harness included
Antenna Adapter: Included with kit
Steering wheel control interface: Included with kit
12v to 6v camera step-down: included with kit
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Pick tool
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 4/30/19 INST99-7390B

Advertisement

loading

Related Manuals for Metra Electronics 99-7390B

Summary of Contents for Metra Electronics 99-7390B

  • Page 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/30/19 INST99-7390B...
  • Page 2 DASH DISASSEMBLY 1. Unclip and slide the top of the center 3. Unclip the panel above the glove box. console back slightly. (Figure A) Unplug the passenger airbag light, then remove the panel. (Figure C) 2. Unclip and remove the panel on the 4.
  • Page 3 DASH DISASSEMBLY (CONT.) 5. Remove (4) Phillips screws securing the 7. Remove (1) Phillips screw securing the radio. Slide the radio out, then unplug lower right side drivers knee bolster. and remove the radio. (Figure E) Unsnap the bolster just enough to access the (1) Phillips screw securing the 6.
  • Page 4 From the factory radio trim panel: 1. Remove (4) Phillips screws securing the inner trim panel, then remove the panel. (Figure A) To the factory radio trim panel: 2. Secure the 99-7390B radio trim panel to the panel using with the factory screws. (Figure B) Continued on the next page (Figure A) (Figure B) 1.800.221.0932...
  • Page 5 KIT PREPARATION (CONT.) Climate Display Installation 1. Remove (4) Phillips screws securing the radio/hazard assembly to the climate/ radio control panel, then unclip and remove the assembly. (Figure C, heavier arrows) 2. Remove (9) Phillips screws securing the back cover to the radio/hazard assembly, then remove the cover.
  • Page 6 KIT PREPARATION (CONT.) 4. Clip the hazard switch into the climate display. (Figure E) 5. Secure the climate-display/hazard- switch assembly to the climate control panel using the factory screws. (Figure F Continue to Kit Assembly (Figure F) (Figure E) 1.800.221.0932 MetraOnline.com...
  • Page 7 KIT ASSEMBLY ISO DIN radio provision with pocket ISO DDIN radio provision 1. Secure the radio brackets to the pocket 1. Secure the radio brackets to the radio using the (2) #8 x 3/8” Phillips screws using the screws supplied with the provided. (Figure A) radio.

  • Page 8: Table Of Contents

    AXXESS INTERFACE INSTALLATION INTERFACE FEATURES TABLE OF CONTENTS • Retains audio controls on the steering wheel Connections ..........................9-10 • Provides NAV outputs (parking brake, reverse, speed sense) Installation ...........................10 • Retains the factory AUX-IN jack Programming the interface and climate display ...............11 •...

  • Page 9: Connections

    CONNECTIONS From the 16-pin harness with stripped leads to the aftermarket radio: From the 7390 harness to the aftermarket radio: • Connect the Red wire to the accessory wire. • Connect the Black wire, and also the Black wire from the AX-CAM6V, to the ground wire. •...

  • Page 10: Installation

    CONNECTIONS INSTALLATION (CONT.) With the key in the off position: 3.5mm jack steering wheel control retention: 1. Connect the 16-pin harness with stripped leads, and the 7390 harness, into the interface. The 3.5mm jack is to be used to retain audio controls on the steering wheel. For the radios listed below, connect the female 3.5mm connector with stripped leads, to the male •...

  • Page 11: Programming The Interface And Climate Display

    PROGRAMMING THE INTERFACE AND CLIMATE DISPLAY Programming the interface: Programming the climate display: For the steps below, the L.E.D. located inside the interface can only be seen while active. The 7. Turn the parking lights on. interface does not need to be opened to see the L.E.D. 8.

  • Page 12: Steering Wheel Control Settings

    STEERING WHEEL CONTROL SETTINGS L.E.D. feedback * Note: If the Axxess interface flashes Red (7) times, and you do not have an Alpine radio connected to it, that means the Axxess interface does not detect a radio connected to it. Verify The (18) Red L.E.D.

  • Page 13: Changing Radio Type

    STEERING WHEEL CONTROL SETTINGS (CONT.) Changing radio type Radio Legend If the L.E.D. flashes do not match the radio you have connected, you must manually program the Radio Number Radio Radio Number Radio Axxess interface to tell it what radio it is connected to. Eclipse (type 1) Clarion (type 2) 1.

  • Page 14: Remapping The Steering Wheel Control Buttons

    STEERING WHEEL CONTROL SETTINGS (CONT.) Remapping the steering wheel control buttons Button Function Legend Once the ASWC-1 has been programmed, the button assignment for the steering wheel controls Function # Function Function # Function may be reassigned if so desired. For example, if the “Seek-Up” button is preferred to be the Volume-Up Band “Mute”...

  • Page 15: Dual Assignment Instructions (Long Button Press)

    STEERING WHEEL CONTROL SETTINGS (CONT.) Dual assignment instructions (long button press) Dual Assignment Legend The ASWC-1 has the capability to assign (2) functions to a single button, except “Volume-Up” and Function # Function Function # Function “Volume-Down”. Follow the steps below to program the button(s) to the desired setting. Not allowed Band Note: “Seek-Up”...
  • Page 16 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/30/19 INST99-7390B...