Removing The Filter Unit; Removing The Ir (Rear) Unit - Sharp XG-PH70X Service Manual

[12] Removing the Filter Unit

1. Disconnect all the connectors from the filter unit. Remove the four screws from the filter unit and then take it out.

[13] Removing the IR (Rear) Unit

1. Disconnect all the connectors from the power unit. Remove the six screws from the Plate and then take out the Plate.
2. Remove the screw from the IR (Rear) unit and detach the IR (Rear) unit.
3. Remove the four screws from the Direct off unit and then take it out.
Chassis
14-1
Plate
14-1
PR3
PR2
PR1
Power unit
Chassis
2 – 11
XG-PH70X/XG-PH70X-N (1st. Edition)
12-1
Filter Unit
IR (Rear) Unit
14-2
14-1
Direct Off Unit
PR3
PR2
PR1