Resetting The Lamp Timer - Sharp XG-PH70X Service Manual

XG-PH70X/XG-PH70X-N (1st. Edition)

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp.
Info
Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
1
Connect the power cord.
Plug the power cord into the AC socket
of the projector.
2
Reset the lamp timer.
For Lamp 1
When you reset the timer for AN-
PH7LP1, while simultaneously holding
down
projector.
"LAMP 1 100%" is displayed, indicating
that the lamp timer is reset.
For Lamp 2
When you reset the timer for AN-
PH7LP2, while simultaneously holding
down
projector.
"LAMP 2 100%" is displayed, indicating
that the lamp timer is reset.
and , press on the
and , press on the
To AC socket
ON button
H&V LENS
SHIFT
button
1 – 15
Power cord
ENTER button
MENU button