Special 232C Command For Factory - Sharp XG-PH70X Service Manual

XG-PH70X/XG-PH70X-N (1st. Edition)

[3] Special 232c command for factory

How to write MAC address
How to write serial number
How to check projector status
(Write) Send the following 232c commands in sequence
1. _ L M
wait "OK"
2. _ L M
wait "OK"
3. _ L M
wait "OK"
4. _ L M
wait "OK"
5. _ L M
wait "OK"
6. _ L M
(Read) Send the following 232c commands
_ L M
MAC address will be appear on screen
(Write) Send the following 232c commands in sequence.
1. S N _
wait "OK"
2. S N _
wait "OK"
3. *1 *2 *3
4. *1 *2 *3
wait "OK"
(Read) Send the following 232c commands
S N R
serial number will be appear on screen
*1~*12/serial number
same data as step3
NOTE: When number of characters of the serial number is shorter than twelve characters,
please use space character "".
for example
serial number is "1311163"
serial number is "412311112"
(Read) Send the following 232c commands
T F C
serial number will be appear on screen
A 0 0 *1 *2 +"enter" key
A 1 0 *3 *4 + "enter" key
A 2 0 *5 *6 + "enter" key
A 3 0 *7 *8 + "enter" key
A 4 0 *9 *10 + "enter" key
A 5 0 *11 *12 + "enter" key
A 1 + "enter" key
1 1 2 3 4 + "enter" key
2 5 6 7 8 + "enter" key
*4 *5 *6 *7 *8 *9
*4 *5 *6 *7 *8 *9
D 1 + "enter" key
1 3 1 1
4 1 2 3 1 1
K 1 + "enter" key
3 – 4
*1 the first byte
*2 the second byte
*3 the third byte
*4 the fourth byte
*5 the fifth byte
*6 the sixth byte
*7 the seventh byte
*8 the eighth byte
*9 the ninth byte
*10 the 10th byte
*11 the 11th byte
*12 the 12th byte
*10 *11 *12 + "enter" key
*10 *11 *12 + "enter" key
1 6 3 + "enter" key
1 1 2 + "enter" key