Remote Control - Sharp XG-PH70X Service Manual

XG-PH70X/XG-PH70X-N (1st. Edition)

Remote Control

FOCUS buttons
For bringing the projected image
STANDBY button
For putting the projector into
standby mode.
ZOOM buttons
For adjusting the projected
KEYSTONE button
For entering the Keystone
Correction mode.
Mouse/adjustment button
( / / / )
For moving the computer
cursor while the
ADJ./MOUSE switch is the
MOUSE position.
For selecting menu items
while the ADJ./MOUSE
switch is the ADJ. position.
ENTER button
For setting items selected or
adjusted on the menu.
L-click button
For the left click while the
ADJ./MOUSE switch is the
MOUSE position.
ENLARGE (enlarge/reduce)
For enlarging/reducing part of the
BREAK TIMER button
For setting the break time.
AUTO SYNC button
For automatically adjusting images
when connected to a computer.
INPUT 1, 2, 3, 4 and 5 buttons
For switching to the respective
Note
All the buttons on the remote control, except the mouse/adjustment button and the ADJ./MOUSE switch,
are made of luminous material that is visible in the dark. Visibility will diminish over time. Exposure to light
will recharge the luminous buttons.
into focus.
image size.
buttons
image.
input modes.
1 – 5
ON button
For turning the power on.
ADJ./MOUSE switch
For switching the remote control
modes.
H & V LENS SHIFT button
For shifting the lens horizontally
and vertically.
MENU button
For displaying adjustment and
setting screens.
R-click/UNDO button
For the right click while the
ADJ./MOUSE switch is the
MOUSE position.
For undoing an operation or
returning to the previous
display while the ADJ./MOUSE
switch is the ADJ. position.
FREEZE button
For freezing images.
Volume buttons
For adjusting the speaker sound level.
MUTE button
For temporarily turning off the
sound.
BLACK SCREEN button
For temporarily display the black
screen.
RESIZE button
For switching the screen size.
PICTURE MODE button
For switching the picture mode.
WIRED R/C JACK
For connecting the remote control
to the projector when the signals
from the remote control cannot
reach the remote control sensor.