Resetting The Lamp Timer - Sharp XG-P560WA Operation Manual

Regarding the Lamp

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp.
Info
• Make sure to reset the lamp timer only
when replacing the lamp. If you reset the
lamp timer and continue to use the same
lamp, this may cause the lamp to become
damaged or explode.
1
Connect the power cord.
• Plug the power cord into the AC socket
of the projector.
2
Reset the lamp timer.
For Lamp 1
• When you reset the timer, while simul-
taneously holding down \, " and
ENTER, press ON on the projector.
• "LAMP1 0000H" is displayed, indicating
that the lamp timer is reset.
For Lamp 2
• When you reset the timer, while simul-
taneously holding down |, " and
ENTER, press ON on the projector.
• "LAMP2 0000H" is displayed, indicating
that the lamp timer is reset.
-74
ON button
Power cord
ENTER button
\ , ", | buttons