Toshiba Satellite T230 Maintenance Manual page 88

3. Tests and Diagnostics
3.2 Executing the Diagnostic Test
Free-DOS is required to run the DIAGNOSTICS PROGRAM. To start the DIAGNOSTIC
PROGRAM, follow these steps:
Insert the diagnostics USB memory and turn on the computer. (The diagnostics USB
memory contains the Free-DOS boot files.) And then follow the instructions for T&D
program installed in USB memory.
The T&D Program can run single test by you press corresponsive English letter of test item, and
it also asks you if you like to copy test log file to USB memory as reference at the end of test(s).
The test list is as the following:
A. CONFIG CHECK TEST
B. AUDIO SOUND TEST
C. FAN ON/OFF TEST
D. MAIN BATTERY TEST
E. FDD TEST
F. MEMOY CHECK
G. KEYBOARD TEST
H. MOUSE (PAD) TEST
I. LCD PIXELS TEST
J. MAGNETIC SWITCH
K. LAN TEST
L. RTC TEST
M. HDD TEST
N. READ DMI
O. WRITE DMI
P. TP TYPE R/W TEST
Q. EE-PROM SETTING
R. 3D G-SENSOR TEST
S. TOSHIBA LOGO SET
T. DYNABOOK LOGO SET
Satellite/Satellite PRO T230
Series Maintenance Manual
4