Fehler! Verwenden Sie die Registerkarte 'Start', um
soll. Fehler! Verwenden Sie die Registerkarte 'Start', um
werden soll.
4.22
LCD Bezel
Removing the LCD Bezel
Remove the LCD bezel according to the following procedures and Figures 4.34, 4.35 and 4.36.
1. Remove the two screw rubbers on the LCD bezel.
2. Remove the two M2x6 screws.
3. Pry up the left and right sides of the LCD bezel from the inner edges.
4. Pry up the LCD bezel, starting from the bottom edge and toward the top edge.
Satellite/Satellite PRO T230 Maintenance Manual
Figure 4.34 Removing two screws from LCD Bezel
標題
2 dem Text zuzuweisen, der hier angezeigt werden
標題
2 dem Text zuzuweisen, der hier angezeigt
M2×6*2
4 Replacement Procedures
4-57