Table of Contents
Advertisement
KB3 Channel
In the event there are more than one KB3 Programs specified in a Setup, this parameter
specifies which MIDI Channel has priority to load a KB3 Program. You can set this
parameter to a value between 1 and 16. Pressing both Value buttons simultaneously will set
this parameter to the channel in Zone 1.
Saving User Setups
To save the changes to the current Setup, press the Save button once. The Save button's
LED begins to blink and the Keypad button's LED lights. Pressing the Save button opens
standard the Save Dialog. The display shows the following:
The bottom line of the display shows the first available ID number and the current Setup
name. You can save Setups with ID numbers from 1024 to 1087. When you initially press the
Save button, the SP5 always selects the next available ID number and displays the current
Setup name.
In the Save Dialog, there are two parameters available which allow you to specify the ID
number and rename the Setup. Use the first parameter to change the ID number and the
second to rename the Setup. While the Save button's LED is blinking, press one of the
Chan / Param buttons to switch between the two parameters.
Changing ID Numbers
To change the ID number, turn the Alpha Wheel or use the Value buttons to select the
number. You can also use the secondary alphanumeric functions of the Category buttons
to change the ID number, simply type in the new ID number, then press the Enter button.
Note that if you select a number out of range (greater than 1087) and press the Enter
button, the ID number won't change.
Save Setup over: 1/2
1024 New Setup
Edit Setup Mode
Saving User Setups
8-17
Advertisement
Table of Contents
