Table of Contents
Advertisement
Program Mode
Panic
If a MIDI Channel is disabled, the Program name is shown with parenthesis. MIDI
Channels are enabled/disabled in Global Mode, see Channel Enable (ChanEn) on page 9-4.
Panic
Pressing the Keypad and Enter category buttons simultaneously deactivates all sounding
notes and control messages and sends an "All Notes Off " message and an "All Controllers
Off " message on all 16 MIDI channels.
User Programs
If you make changes to the current Program using any of the controllers, the Save button's
LED lights to indicate that a change has been made to that Program. To save the changes to
the current Program, press the Save button once. The Save button's LED begins to blink
and the Keypad button's LED lights. Pressing the Save button calls up the standard Save
Dialog. The display shows the following:
The bottom line of the display shows the first available ID number and the current Program
name. You can save Programs with ID numbers from 1024 to 1087. When you initially
press the Save button, the SP5 always selects the next available ID number and displays the
current Program name.
6-10
Prog Xpose:0
1( Pro Pi ano)
Save Prog over:
1024 Pro Pi ano
Ch:1
1/2
Advertisement
Table of Contents
