Table of Contents
Advertisement
The Operating Modes
Functions
So for example, if you want to send a MIDI Program Change message for Program 83 in
MIDI Bank 4, you would enter the number 595—this number is equal to 4 * 128 + 83.
If the Programs on your connected sound module are organized by MIDI Bank with each
Program number being between 1 and 128, then use the following formula to determine
what number to enter in MIDI Program Change Mode:
So for example, if you want to send a MIDI Program Change message for Program 83 in
MIDI Bank 4, you would enter the number 594—this number is equal to 4 * 128 + (83 - 1).
Demo Function
Pressing the User and All Category buttons simultaneously performs the Demo Function.
Entering this Mode, the SP5 will play a built-in demo sequence designed to demonstrate the
capabilities of the instrument. While the demo sequence plays, the top line of the display
shows the text Demo and the Demo number as well as the total the number of available
Demos. The bottom line of the display shows the Demo name.
The User and All buttons LEDs will be blinking, indicating that the instrument is in Demo
Mode. Use the Alpha Wheel, Value buttons or the Param / Chan Up or Down buttons to
select another demo.
Pressing any button, other than the buttons listed above, exits the Demo Function.
5-6
[MIDI Bank number] * 128 + [Program number] - 1
Advertisement
Table of Contents
