Table of Contents
Advertisement
Global Mode
The Global Parameters
Press the Next button–the display will show the message
appear as a removable disk/drive on your computer. Press the Next button again to save
the files to the SP5 removable disk/drive. The display briefly flashes a Saving... message then
shows the message
drive and copy the file to your computer.
Pressing Previous will cancel the save operation and recall the
occurs during the save operation, then the display will show the error message,
If the SP5 is not connected to a computer, the display will show the error message
Next button will retry to connect.
The Load (Overwrite)? Dialog
NOTE: If the SP5 is currently connected to your computer as a MIDI controller, eject or
Safely Remove it before continuing. Selecting the Load (Overwrite) Dialog will disconnect
any MIDI device connected via USB.
The
Programs and User Setups from a computer connected to the SP5 via USB. Selecting
(overwrites) the existing User Programs and Setups currently in the SP5.
With the SP5's power off, connect a USB cable from a computer to the USB port on
the SP5's rear panel. Power-up the SP5, press the Global button, then select the
Press the Next button–the display will show the message
SP5 will appear as a removable disk/drive on your computer. Copy the file, containing
your previously saved User Programs and User Setups, from your computer into the
SP5 removable disk/drive. Pressing the Next button will load the file, the display shows
Pressing the Previous button will cancel the load operation and recall the
If no file is in the SP5 temporary drive during the load or an error occurs during the
load operation, then the display will show the error message,
specifying the reason for the error.
If the SP5 is not connected to a computer, the display will show the error message
the Next button will retry to connect.
9-8
. Pressing the Previous button will recall the
dialog allows you to load a file containing previously saved User
loads the previously saved User Programs and User Setups and deletes
dialog.
, when complete
dialog.
. Pressing the Previous button will recall the Load (Overwrite)? dialog—pressing
. Open the SP5 removable disk/
.
? and the SP5 will
dialog. If an error
dialog—pressing the
and the
and a message
.
Advertisement
Table of Contents
