Panasonic KX-TD208CE Operating Instructions Manual page 84

2.6 Others
!
! • You can program whether the charge or the frequency comes first to be shown by the
System Programming [107].
• If the other party doesn't answer, displays for the other party's COLP number and Charge
Information are skipped.
• Your CLIP number is programmable by System Programming [404].
• Before the calling party answers, the calling party's COLP number and the charge
information are not displayed.
• As soon as the charge information is received, the information is shown on the display
and the display after this starts from the dialled phone number again. (See the above
chart.)
• You can modify and call back the logged numbers. Refer to the "Recording the Caller's
Information Automatically (Incoming Call Log)."
• Others (Section 2.6)
Recording the Caller's Information Automatically
Locking the Incoming Call Information Display
• Manager Programming (Section 3.3)
[001] System Speed Dialling Number Set
• System Programming (Section 3.4)
[107] Charge Indication Selection
• ISDN Port Programming (Section 3.7)
[404] CLIP/COLP Number Assignment
• PC Programming (Section 3.13)
* An ISDN line with the Caller ID feature provides you with a caller's information, such as his/her telephone
number, on the outside line (CO) assigned to receive ISDN service calls.
2-70
Operations
(Incoming Call Log — KX-T7230/KX-T7235/KX-T7433/KX-T7436)
(Incoming Call Log Lock — KX-T7230/KX-T7235/KX-T7433/KX-T7436)