Table of Contents
Advertisement
2.7
Display Operation (KX-T7235/KX-T7433/KX-T7436)
<Example>
— To enter "Mike" by using the SELECT button;
See Combination Table 1.
1. Press 6 and then press the SELECT button once to enter "M."
2. Press 4 and then press the SELECT button six times to enter "i."
3. Press 5 and then press the SELECT button four times to enter "k."
4. Press 3 and then press the SELECT button four times to enter "e."
— To enter "Mike" by using the SHIFT button and the Soft button;
See Combination Table 1.
1. Press 6 and then press the S1 button to enter "M."
2. Press 4 and then press the SHIFT and S3 button to enter "i."
3. Press 5 and then press the SHIFT and S2 button to enter "k."
4. Press 3 and then press the SHIFT and S2 button to enter "e."
— Using the Jog Dial (With a KX-T7433/KX-T7436)
See Combination Table 2.
1. Press 6 and then rotate the Jog Dial one pulse to enter "M".
2. Press 4 and then rotate the Jog Dial six pulses to enter "i".
3. Press 5 and then rotate the Jog Dial four pulses to enter "k".
4. Press 3 and then rotate the Jog Dial four pulses to enter "e".
OR
1. Press 2 and then rotate the Jog Dial until "M" appears.
2. Press 2 and then rotate the Jog Dial until "i" appears.
3. Press 2 and then rotate the Jog Dial until "k" appears.
4. Press 2 and then rotate the Jog Dial until "e" appears.
• Pressing the SHIFT button alternates between capital and lower case letters. Once this
!
!
button is pressed, the SHIFT mode continues until it is pressed again.
• To erase the last word (to backspace), press the CONFERENCE button.
(The CONFERENCE button becomes the "←" (backspace) key when using the overlay.)
• To erase all of the data, press the CLR (S2) button.
• If you keep rotating the Jog Dial, all of the characters will be displayed in order.
<Example> If you rotate the Jog Dial after pressing 2, all of the characters will appear in
the following order:
A a B b ···· Z z (space) ! ? . , ' : ; * / + – = < > # $ % & @ ( ) A a B b ···
• The default is "Not Stored."
• Up to ten dialling numbers and names can be assigned. Each dialling number has a
maximum of 16 digits and each name has a maximum of ten characters.
2-88
Operations
Advertisement
Table of Contents
