Panasonic KX-TD208CE Operating Instructions Manual page 39

2.3 Making Calls
Interrupting an Existing Call (Executive Busy Override)
Allows the pre-assigned extension user to interrupt an existing call to establish a three-party
conference call. You can also deny to be interrupted your conversation from other extension
users.
I
nterrupting an existing extension call
SLT and PT
If you make an intercom call and hear
a busy tone;
3
Dial 3. Confirmation
tone
T
o leave the conference
SLT and PT
The other two parties
continue their conversation.
On-hook
D
enying an existing call to be interrupted (Executive Busy Override Deny)
SLT and PT
7
Off-hook
!
• When interrupting an existing extension call, you must dial within 10 seconds while a
!
busy tone is heard.
• Class of Service programming determines which extension users can perform this feature.
• This feature does not work if the extension has set Denying an existing call to be
interrupted or Data Line Security.
• COS Programming (Section 3.8)
[514] Executive Busy Override
[515] Executive Busy Override Deny
A three-party conference
is now established.
1
3 3
0
Dial 733. Dial 0 or 1.
I
nterrupting an existing outside call
PT
Off-hook
to set
to cancel
Confirmation tone
Press CO corresponds to
the call that you want to
interrupt.
On-hook
Operations
Confirmation
tone
2-25