Table of Contents
Advertisement
2.3
Making Calls
Redialling
Redialling the Last Dialled Number (Last Number Redial)
Automatically saves the last outside number you dialled and allows you to make the same
outgoing call again.
Any Telephone
Off-hook
!
• A push-button dial telephone user can also use "66" for redialling, while a rotary dial
!
telephone user can only use "66."
• Up to 24 digits can be stored and redialled not including the ISDN port access code.
• The memorised telephone number is replaced by the next telephone number sent to a
outside line (CO). Dialling only an ISDN port access code does not change the memorised
number.
• If you dial in the handsfree mode (press SP-PHONE + REDIAL button), redial will be
repeated four times at 120 second intervals by default (Automatic Redial – DPT only).
Repeating time and interval can be changed by System Programming.
• If there is a PAUSE in the assigned numbers, the numbers after the PAUSE are sent as
DTMF signals.
• Timer Programming (Section 3.5)
[208] Automatic Redial Repeat Time
[209] Automatic Redial Interval Time
if using a push-button
#
dial telephone
if using a rotary dial
6
6
telephone
Dial # or 66.
PT
REDIAL
Off-hook
Press REDIAL.
Operations
2-21
Advertisement
Table of Contents
