Table of Contents
Advertisement
2.3
Making Calls
Dialling Simply by Going Off-Hook (Pickup Dialling)
Allows you to make an outgoing call simply by going off-hook, if you have previously
stored the telephone number.
S
toring the phone number
SLT and PT
Off-hook
S
etting / Cancelling
SLT and PT
Off-hook
D
ialling
SLT and PT
Wait for an answer and talk.
Off-hook
!
• A rotary dial telephone without the "#" button cannot program this feature. To program
!
the phone number, temporarily replace the rotary dial telephone with a telephone which
has the "#" button.
• To store the telephone number of an outside party, the ISDN port access code (9, 81 or 82)
must be stored as the leading digit.
• Up to 16 digits, consisting of "0 through 9" and " ", can be stored.
• Enter "
• If there is a PAUSE in the assigned numbers, the numbers after the PAUSE are sent as
DTMF signals.
• While waiting after lifting the handset, you can dial another party, which overrides this
feature. The waiting time is programmable.
• Timer Programming (Section 3.5)
[204] Pickup Dial Waiting Time
7
4
2
phone no.
Dial 742.
Dial phone
number.
1
7
4
0
Dial 74.
Dial 1 or 0.
" for a PAUSE.
#
Dial #. Confirmation
tone
to set
to cancel
Confirmation
tone
On-hook
On-hook
Operations
2-19
Advertisement
Table of Contents
