B15 Darning - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
z
x
q
0.9 cm
w
www.toews.com
c
54

B15 Darning

z Attach the automatic buttonhole foot R and pull the
button holder all the way out.
x Start the machine and sew to the required length, then
press the reverse button. This sets the darning length.
Continue sewing until the machine stops automatically.
q Required length
c Sew another layer of darning over the rst layer, at a
right angle to it.
NOTE:
The maximum darning length is 2 cm (3/4) and the
maximum width is 0.9 cm (3/8).
To sew the same size darning
When nished sewing, a conrmation message will
appear.
Simply start the machine to sew another layer of darning
stitches in the same size.
To sew the next layer of darning stitches in a different
size, press the X key.
To sew a shorter layer of darning stitches
Sew the rst line to the desired length and stop the
machine.
Press the reverse button w and start the machine again.
The machine will sew the rest of the darning and stop
automatically.
To adjust the evenness of darning stitches:
You can correct unevenness of darning stitches by
pressing the "–" or "+" key in the adjusting window.
If the left corner is lower than the right side, press the "–"
key to correct it, and vice versa.
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide