Manual Stitch Settings; Altering Needle Drop Position (Straight Stitches); Altering Stitch Width; Altering Stitch Length - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
q w e
www.toews.com

Manual Stitch Settings

You can alter the stitch width (or needle drop position of
the straight stitches) and stitch length.
Press the "+" or "–" key beside the setting you wish to
change. Press default key e to recover the original stitch
setting.
When you press the setting bar, the manual setting
window expands to show more options.
You can alter other settings such as needle thread
tension and presser foot pressure value, depending on
the selected stitch pattern.
Press the setting bar again to shrink the manual setting
window.
w e

Altering needle drop position (straight stitches)

Press the "+" key to move the needle drop position to the
right.
Press the "–" key to move the needle drop position to the
left.

Altering stitch width

Press the "+" key to increase the stitch width.
Press the "–" key to decrease the stitch width.

Altering stitch length

Press the "+" key to increase the stitch length.
Press the "–" key to decrease the stitch length.
36
q Setting bar
w Manual setting window
e Default key
NOTE:
The adjustable range of patterns U6, U7, U9-U12 and
U27 is 0.0 to 7.0.
NOTE:
The adjustable range of patterns U6 is 0.0 to 2.50, U7
is 1.0 to 2.50, U9-U12 and U27 is 0.0 to 5.0.
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide