Securing Seams; Cutting Threads; Using The Seam Guide Lines; Angle Scale On The Needle Plate - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
w
e
www.toews.com
q

Securing seams

For fastening the ends of seams, press the reverse
button and sew several reverse stitches.
The machine sews in reverse as long as you press and
hold the reverse button.
q Reverse button
Press the reverse button once when sewing the lock-
a-matic stitch (pattern U2) or locking stitch (pattern
U3) and the machine will lock the stitches off and stop
automatically.

Cutting threads

To cut the threads after nishing sewing, press the
thread cutter button. The needle bar and presser foot will
automatically go up after trimming the threads.
w Thread cutter button
NOTE:
The thread cutter button does not function when the
presser foot is up.
Use the thread cutter on the face plate to cut
specialized or thick threads if the auto thread cutter
does not work well.
To use the thread cutter on the face plate, remove the
fabric and draw it to the back.
Pull the threads up and slip them between the thread
cutter and face plate from behind.
Pull the threads toward you to cut.
e Thread cutter

Using the seam guide lines

The seam guides on the needle plate and hook cover
help you measure seam allowance.
NOTE:
The numbers on the needle plate indicate the distance
from the center needle position in millimeters and
inches.

Angle scale on the needle plate

The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with the 1/4 seam foot O.
31
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide