Attaching The Embroidery Hoop To The Machine; Thread Holder - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
z
q
x
r
www.toews.com
w
e

Attaching the Embroidery Hoop to the Machine

z Turn the power switch on and open the carriage arm.
Press the mode switch key and a warning message
will appear.
Press the OK key and the carriage will move to the
starting position.
The visual touch screen will display the embroidery
mode window.
q Mode switch key
NOTE:
If you press the mode switch key with the carriage
arm retracted, a conrmation message will appear.
Do not press the OK key or X key. Instead, open the
carriage arm.
x Place the hoop on the machine and attach the hoop to
the carriage by inserting the lock pin of the hoop into
the hole in the carriage.
Turn the knob clockwise to secure the hoop.
w Lock pin
e Hole

Thread Holder

To avoid sewing over a tail of the needle thread, place
the thread end on the thread holder.
r Thread holder
Pass the needle thread through the hole in the
embroidery foot and draw it up to the thread holder.
Hang the thread on the thread holder from front to back.
113
Janome Memory Craft 15000
MC15000 Owners Manual/ User Guide