Adjusting The Lateral Position; Adjusting The Longitudinal Position; Foot Control Preparation - Janome memory craft 15000 Instruction Manual

Janome 15000 Instruction Manual
q
z
w
x
e
c
v
www.toews.com

Adjusting the lateral position

z Loosen the setscrews w under the switch.
x Slide the switch to left or right, and x it at the

Adjusting the longitudinal position

z Remove the setscrews w and washers q.
x Attach the switch to the desired position and x it
w

Foot Control Preparation

z Remove the cable tie q from the cable.
q
x If you wish to use the thread cutter switch, you need
to connect it with the foot control.
Insert the pin connector w into the jack e on the foot
control.
c Turn the foot control upside down.
Open the cover of the foot control.
v Draw out the cable from the foot control.
6
desired position by tightening the setscrews using a
Phillips head screwdriver.
with the setscrews and washers.
Tighten the setscrews securely using a Phillips head
screwdriver.
MC15000 Owners Manual/ User Guide
Janome Memory Craft 15000