Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2008 CL-Class Operator's Manual

Controls in detail
Memory function
The following settings are stored when us-
ing the buttons on the passenger door:
Front passenger seat, head restraint
high and backrest position
Lumbar support (CL 550)
Drive-dynamic multicontour seat*:
activation/deactivation
M Memory button
1 2 3 Memory position buttons
386

Storing positions into memory

Adjust the seat ( page 368) to the de-
sired position.
On the driver's side: adjust the steering
wheel ( page 379) and the exterior
rear view mirrors ( page 381) to the
desired position.
Press memory button M.
Release memory button M and press
one of the memory position buttons
1, 2 or 3 within 3 seconds.
All the settings are stored at the
selected position.

Recalling positions from memory

!
Do not operate the power seats using a
memory position button if the seat backrest is in
an excessively reclined position. Doing so could
cause damage to front or rear seats.
First move seat backrest to an upright position.
Press and hold one of the memory
position buttons 1, 2 or 3 until the
seat, steering wheel and exterior rear
view mirrors have completely moved to
the stored positions.
i
Releasing the memory position button
immediately stops movement to the stored
positions.
The drive-dynamic multicontour front seat*
and/or lumbar support (CL 550) will continue to
be adjusted.