Table of Contents
Advertisement
Control systems
COMAND navigation system (entering a destination)
i
In the list of input characters 6, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.
The top list entry 1 first shows the street
first alphabetically and best corresponds
to the input data as it has been entered up
to that point.
As soon as you enter a character from in-
put characters 6, the top list entry 1
shows the street which best corresponds
to the input data as it has been entered up
to that point.
At the same time, COMAND automatically
supplements characters 2 entered by the
user with appropriate characters 3.
omp
Selecting characters: Slide
rotate ymz.
Confirming character selection:
Press n.
Deleting individual characters:
Select ) in the bottom line and
press n.
208
Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
Canceling an entry: Select "Back" in
the bottom line and press n.
or
Press back button L in the center
console ( page 84).
As soon as COMAND can clearly attribute
the characters entered to a street, the in-
put characters 6 disappear. You see the
street list without the input characters.
Here you can confirm the current entry or
make another selection.
During character entry, you can also man-
ually switch to the street list without input
or
characters at any time.
Switching manually to the street list
without input characters: Slide qm.
or
Select ? in the second line from the
bottom and press n.
Street list without input characters
1 Symbol for more selection options
qmr
Selecting a street: Slide
rotate ymz.
or
Enter a street number with the tele-
phone keypad using the A - 9
buttons ( page 86).
i
Example: Pressing 2 jumps to the 2nd Ave-
nue.
or
Advertisement
Table of Contents
