Table of Contents
Advertisement
Notes about checking engine oil level
When checking the oil level
the vehicle must be parked on level
ground
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least 5 minutes with
the engine turned off
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
Checking engine oil level with the
control system (CL 600 and
CL 65 AMG)
To check the engine oil level via the multi-
function display, do the following:
i
The menu overview can be found on
( page 284).
Switch on the ignition ( page 365).
Press ( or & to select the menu
"Service".
Press $ or % to select "Engine
Oil Level".
Press #.
The following message is seen in the multi-
function display:
"Measuring
Engine Oil Level
Accurate Only
When Vehicle Is Level"
Operation
Engine compartment
One of the following messages will
subsequently appear in the multifunction
display:
"Engine Oil Level
OK"
"Add 1.0 qts. Engine Oil
At Next Refueling"
(Canada: "1.0 l")
"Add 1.5 qts. Engine Oil
At Next Refueling"
(Canada: "1.5 l")
"Add 2.0 qts. Engine Oil
At Next Refueling"
(Canada: "2.0 l")
i
If you want to interrupt the checking proce-
dure, press button L on the multifunction
steering wheel.
If necessary, add engine oil
( page 557).
For more information on engine oil, see the
"Technical data" section ( page 733) and
( page 736).
555
Advertisement
Table of Contents
