Mercedes-Benz 2008 CL-Class Operator's Manual page 643

Practical hints
What to do if ...?
Display
ABS and ESP
Currently Unavailable
See Oper. Manual
642
Possible cause/consequence
® ®
ABS, ESP as well as PRE-SAFE
available due to a malfunction. BAS is also
switched off. It is possible that the self-diag-
nostics have not yet been completed.
The brake system still functions normally.
®
BAS Plus* and PRE-SAFE Brake* are also
not available.
®
The ABS, ESP as well as PRE-SAFE
deactivated because of insufficient power
supply. The charging voltage has fallen be-
low 10 volts.
The brake system still functions normally
®
but without the ABS, ESP and PRE-SAFE
available.
®
BAS Plus* and PRE-SAFE Brake* are also
not available.
Possible solution
are not Drive a short distance with gentle turns
above a speed of 12 mph (20 km/h).
The message disappears when ABS and ESP
are again available.
®
were When the voltage is above this value again, the
®
ABS, ESP and PRE-SAFE
and the message in the multifunction display
should disappear.
If the message in the multifunction display does
®
not disappear:
Have the generator (alternator) and the bat-
tery checked.
®
®
are operational again