Nav* Menu; Vehicle Status Message Memory Menu - Mercedes-Benz 2006 C 55 AMG Operator's Manual

Controls in detail
Control system

NAV* menu

The NAV menu contains the functions
needed to operate your navigation system.
Press button è or ÿ repeatedly
until the message NAV appears in the
multifunction display.
If COMAND* is switched off, the mes-
sage NAV off appears in the multifunc-
tion display.
With COMAND* switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveled on appear in
the multifunction display.
With COMAND* switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
134

Vehicle status message memory menu

Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the
system. Such messages appear in the mul-
tifunction display and are based on condi-
tions or system status the vehicle's system
has recorded.
The vehicle status message memory menu
only appears if there are any messages
stored.
Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner's
and/or driver's responsibility to maintain
the vehicle's operating safety by having all
required maintenance and
safety checks performed on the vehicle and
by bringing the vehicle to an authorized
Mercedes-Benz Center to address the mal-
function and warning messages
( page 358).
Press button è or ÿ repeatedly
until the vehicle status message
memory appears in the multifunction
display.
If the vehicle status message memory
menu does not appear, then there are
no messages stored.
G