Controls in detail
Audio system
Calling up wavebands for radios
with SAT
Press
FM
,
AM,
or
WB
soft key repeatedly
until desired waveband has been
selected.
The FM, AM, and WB wavebands are
called up one after another.
The waveband currently selected
appears in the upper left-hand corner
of the display.
206
Selecting a station
The following options are available for
selecting a station:
Direct frequency input ( page 206)
Manual tuning ( page 207)
Automatic seek tuning ( page 207)
Scan search ( page 207)
Station memory ( page 207)
Automatic station memory (Autostore)
( page 208)
The station search proceeds in the
following frequency increments:
200 KHz in FM range
10 KHz in AM range
Direct frequency input
Select desired waveband.
Press * button.
Enter desired frequency with
buttons 1 to R.
i
You can only enter frequencies within
the respective waveband.
If a button is not pressed within
4 seconds, the radio will return to the
last station tuned.