Mercedes-Benz 2006 C 55 AMG Operator's Manual page 400

Bi-Xenon* headlamp
Warning!
Do not remove the cover 1 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
1 Housing cover for Bi-Xenon headlamp
2 Housing cover for high beam flasher,
parking and standing lamp
G
3 Bulb socket for turn signal lamp bulb
4 Bulb socket for high beam flasher bulb
5 Bulb socket for parking and standing
lamp bulb
Practical hints
Replacing bulbs
High beam flasher bulb
Press the clamp on housing cover 2
and remove it.
Pull the electrical connector off.
Turn bulb socket 4 counterclockwise
and take out the bulb.
Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
Turn bulb socket 4 clockwise until it
engages.
Plug the electrical connector onto the
bulb.
Align housing cover 2 and press until
it engages.
399