Installing Towing Eye Bolt - Mercedes-Benz 2005 CLK 320 Operator's Manual

Clk-class coupe

Table of Contents

If the battery is disconnected or

the SmartKey will not turn in the

starter switch. For more informa-

tion, see "Battery" ( page 420)

and "Jump starting" ( page 423).

the gear selector lever will remain

locked in position P. For informa-

tion on manually unlocking the

transmission gear selector lever

see ( page 400).

Installing towing eye bolt

Towing eye bolt CLK 320/CLK 500

1 Cover on right side of front bumper

Practical hints

Towing the vehicle

2 Cover on right side of rear bumper

To remove cover:

Press mark on cover in direction of ar-

Lift cover off to reveal threaded hole for

towing eye bolt.

The towing eye bolt is supplied with the

tool kit (located in the compartment under-

neath the trunk floor).

Screw towing eye bolt to its stop and

tighten with lug wrench.

To reinstall cover:

Fit cover and snap into place.