Table of Contents
Advertisement
Accepting an incoming call
If the telephone is active in the background
(reception symbol is visible in the display),
the audio source is muted when an incom-
ing call is received. A ringing tone can be
heard and the caller's telephone number,
or the name under which the telephone
number has been saved in the telephone
book, appears in the display. If the caller's
number is not relayed,
CALL
will appear in
the display.
Press s button.
The call is accepted.
Muting a call
It is possible to mute a call; the caller is
then no longer able to hear you.
Mute on
Press
soft key.
MUT
will appear in the display.
MIC MUTE
Mute off
Press
MUT
soft key again.
Terminating a call
Press t button.
The current call is terminated and the
muted audio source becomes active
again.
Controls in detail
Audio system
Accepting a second incoming call
If you receive another call during an al-
ready active call, you can accept the sec-
ond call and switch between the two.
Accepting a second call
Place new call by entering tele-
phone number manually.
i
You will be notified of the second call
acoustically, but you will not see this in
the display.
You are connected to the second
caller; the first caller is kept on hold.
243
Advertisement
Table of Contents
