Table of Contents
Advertisement
Practical hints
Replacing bulbs
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
position M ( page 124).
Tail lamp unit
Open trunk lid.
Swing the trim panel covering the cor-
responding rear lights to the side.
1 Tab
Press tabs 1 together.
Remove the bulb carrier.
410
Press gently onto the respective bulb
and turn counterclockwise out of its
bulb socket.
Press the new bulb gently into its bulb
socket and turn clockwise until it
engages.
1 Brake lamp
2 Turn signal lamp
3 Backup lamp
4 Standing and side marker lamp
5 Rear fog lamp (driver's side)/tail
Reinstall the bulb carrier.
Let tabs 1 engage.
Reinstall trim panel.
License plate lamp
1 Screws
Loosen both screws 1.
Remove the license plate lamp.
Replace the tubular lamp.
Reinstall the license plate lamp.
Retighten the screws 1.
Advertisement
Table of Contents
