Table of Contents
Advertisement
Practical hints
Towing the vehicle
Installing towing eye bolt
1 Cover on right side of front bumper.
316
2 Cover on right side of rear bumper.
To remove cover:
Press mark on cover in direction of ar-
row.
Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the wheel well below the
trunk floor).
Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
Fit cover and snap into place.
Advertisement
Table of Contents
