Table of Contents
Advertisement
Getting started
Adjusting
Exterior rear view mirrors
Warning!
Exercise care when using the passenger
side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your in-
side rear view mirror or glance over your
shoulder before changing lanes.
!
Electrolyte drops coming into contact
with the vehicle paint finish can only be
completely removed while in their
liquid state by applying plenty of water.
40
The buttons are located above the exterior
lamp switch.
G
1 Adjustment button
2 Passenger side mirror
3 Driver's side mirror
Make sure the ignition is switched on.
All the lights in the instrument cluster
come on.
Press button 3 for the left mirror or
button 2 for the right mirror.
Push adjustment button 1 up, down,
left or right according to the setting de-
sired.
i
The memory function* ( page 95) lets
you store the setting for the exterior
rear view mirrors together with the set-
tings for the steering wheel and seat
positions.
!
If an exterior rear view mirror was forc-
ibly pushed forward (hit from the rear)
or forcibly pushed backward (hit from
the front), reposition it by applying firm
pressure until it snaps into place.
The mirror housing is now properly po-
sitioned and you can adjust the mirror
normally.
i
At low ambient temperatures, the mir-
rors will be heated automatically.
For more information, see "Rear view mir-
rors" ( page 146).
Advertisement
Table of Contents
