Mercedes-Benz 2004 C-Class Coupe Operator's Manual page 211

Roadside Assistance calls can be ter-
minated using the ì button on the
multifunction steering wheel.
Information button ¡
The Information button ¡ is located be-
low the center armrest cover.
Press and hold the button (for longer
than two seconds).
A call to the Customer Assistance Cen-
ter will be initiated. The button will
flash while the call is in progress. The
message
INFO – CONNECTING CALL
appear in the multifunction display.
When the connection is established, the
message INFO – CALL CONNECTED
in the multifunction display. The Tele Aid
system will transmit data generating the
vehicle identification number, model, color
and location (subject to availability of cel-
lular and GPS signals).
A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be estab-
lished. When a voice connection is estab-
lished the audio system mutes and the
message
TELE AID – INFO CALL ACTIVE
appears in the multifunction display. Infor-
mation regarding the operation of your ve-
hicle, the nearest Mercedes-Benz Center
or Mercedes-Benz USA products and ser-
vices is available to you.
For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you sep-
arately) to learn more (USA only).
i
will
The indicator lamp in the Information
button ¡ remains illuminated in red
for approx. ten seconds during the sys-
appears
tem self-check after turning SmartKey
in the starter switch to position 2 (to-
gether with the "SOS" button and the
Roadside Assistance button •).
Controls in detail
Useful features
See System self-check ( page 207)
when the indicator lamp does not come
on in red or stays on longer than ap-
proximately ten seconds.
If the indicator lamp in the Information
button ¡ is illuminated continuous-
ly and there was no voice connection to
the Response Center established, then
the Tele Aid system could not initiate
an Information call (e.g. the relevant
cellular phone network is not avail-
able). The message INFO –
CALL FAILED appears in the multifunc-
tion display.
Information calls can be terminated us-
ing the ì button on the multifunc-
tion steering wheel.
211