Table of Contents
Advertisement
Removing the wheel
1 Alignment bolt
Unscrew upper-most wheel bolt and re-
move.
Replace this wheel bolt with the align-
ment bolt 1 supplied in the tool kit.
Remove the remaining bolts.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
Remove the wheel.
Mounting the new wheel
1 Wheel bolt for light alloy rims
2 Wheel bolt for light alloy spare wheel
1
rim size 4
/
B x15 H2
2
!
Wheel bolts 2 must be used when
mounting spare wheel rim
1
size 4
/
B x 15 H2 ( page 326).
2
The use of any wheel bolts other than
wheel bolts 2 for spare wheel rim
1
size 4
/
B x15 H2 can cause physical
2
damage to the vehicle.
Practical hints
Flat tire
Warning!
Make sure to use original length wheel bolts
when remounting the original wheel after it
has been repaired.
Clean contact surfaces of wheel and
wheel hub.
Guide the spare wheel onto the align-
ment bolt and push it on.
Insert wheel bolts and tighten them
slightly.
Inflate the spare tire using the electric
pump ( page 304).
Warning!
Inflate spare wheel with collapsible tire only
after the wheel is properly mounted.
Inflate the spare wheel tire using the electric
air pump before lowering the vehicle.
G
G
303
Advertisement
Table of Contents
