Switch Block Type Lock Lamps On/Off; Skip Detector Zones And Malfunctions - Bosch UEZ Operation Manual

Operating the Functions in the Main Menu
Switch block type lock lamps on/off, skip detector zones and malfunctions
Call up and quit submenu
"AREAS" and appropriate zone:
see previous page.
Switch block type
lock lamp on/off
Call up and quit submenu
"AREAS" and appropriate
zone: see previous page.
Skip zone
614–30.0212.0270–01 A2
STATUS AREA 2
East hall storage area 3
READY FOR ARMING
AREA+1 LAMP OFF
STATUS AREA 3
East hall storage area 5
0004 – 05 MALF. Window in staircase
LSN RING/STUBLINE MALFUNCTION
AREA+1 LAMP OFF
The reason why the system is not ready for arming is
shown in the display.
OFF
IGNORE ACTUALISE
OFF
IGNORE ACTUALISE
The softkey is used to switch
the block type lock lamps on
or off.
The status of the block type
lock lamps is shown in the
display above the softkey.
If arming the system is not
possible, max one
"triggered zone" or
"Mains malfunction" or
"Malfunction" NVU or
"Printer malfunction" or
"Malfunction BE 1000
can be removed once from
surveillance.
After disarming, the Service
Department has to be noti-
fied.
26