Resetting The Central Control Unit - Bosch UEZ Operation Manual

Message Display / Processing

Resetting the central control unit

Enter operating code
(see section
Operating Authorisation)
reset
Calling up
reset
Resetting the
central control unit
614–30.0212.0270–01 A2
RESET MESS.TYPE:
INTRUS. INT ZONE 0035 – 16
1
Storage room Entrance 1st floor
TOTAL MESS.TYPE SINGLE
RESET MESS.TYPE:
INTRUS. INT ZONE 0035 – 16
1
Storage room Entrance 1st floor
TOTAL MESS.TYPE SINGLE
INTRUSION
The softkey "TOTAL" resets all
detectors triggered by the
INTRUSION
central control unit.
The
picture appears in the display
as soon as the central control
unit is in quiescent condition.
If certain triggered detectors
cannot be reset by the author–
ised personnel, inform the Ser-
vice Department.
quiescent condition
14