Bosch UEZ Operation Manual page 22

Operation Authorisation
Basic/complete/maintenance operation
Maintenance:
with hood removed, press "Code" (technician)
Complete operation: code for operation authorisation 2
Basic operation: code for operation authorisation 1
Operation without operator code
Operable functions
Switch on/off (page 38 ff.)
– Group list/zones
– Detectors
– Tableau points
– Sounders/strobes
– View switchoffs
Maintenance (page 43)
– Zones
– Detectors
– Sounders/strobes
– Check SD key safe
– Detector test
x = Operation can be carried out with appropriate code.
x = Operation can be carried out with appropriate code only if programmed.
614–30.0212.0270–01 A2
Maintenance:
with hood removed, press "Code" (technician)
Complete operation: code for operation authorisation 2
Basic operation: code for operation authorisation 1
Operation without operator code
0 1 2 3
Maintenance (page 43)
– Change LSN modular processing LVM
(x) (x) x
(in case of redundancy)
(x) (x) x
– View status of maintenance
x x
Block (page 44 ff.)
x x
– Block zones
x x x x
– Block detectors
– View blockings
x x
x x
x x
x
x x x x
Operable functions 0 1 2 3
x
x x x x
x
x
x x x x
continued on next page
22