Flash Memory Expansion Installation - SATO CL612e Service Manual

Section 9. Optional Accessories

Flash Memory Expansion Installation

REMOVE (3)
SCREWS
FLASH MEMORY MODULE
INSERT THE FLASH MEMORY
MODULE INTO THE MAIN PCB
MEMORY FRAME AT
APPROXIMATELY 45
INDEXING NOTCH ON THE
MODULE. GENTLY PUSH DOWN TO
SNAP INTO POSITION
Page 9-20
RAISE THE ACCESS DOOR AND
LOOSEN (2) SCREWS ON THE INSIDE
TOP OF THE PRINTER
Fig. 9-23
NO NOTCH ON THIS SIDE
APPROXIMATELY
INDEXING NOTCH
Figs. 9-25
0
. NOTE THE
SATO CL608e/CL612e Service Manual
0
45 ANGLE
INDEXING NOTCHES
PN 9001079
Rev. B