Timing Belt Tension Adjustment - SATO CL612e Service Manual

5.7 Timing Belt Tension Adjustment

STEP
1.
2.
3.
RAISE THE ACCESS DOOR AND
LOOSEN (2) SCREWS ON THE INSIDE
TOP OF THE PRINTER
REMOVE (3)
SCREWS
PN 9001079
Rev. B
PROCEDURE
Remove (3) screws holding the left side cover to the printer. Raise
the access door and loosen the (2) screws on the inside top of the
printer. Lift off the left side cover. .ig. 5-14
Loosen the locking screws and belts will self-adjust. Tighten, but do
not overtighten the screws. .ig. 5-15
Replace the left side cover.
Fig. 5-14
SATO CL608e/CL612e Service Manual
Section 5. Mechanical Adjustments
ADJUSTMENT
SPRING
LOCKING
SCREWS
TIMING BELT "B"
Fig. 5-15
Page 5-11