Engineering Mode - LG T5100 Service Manual

10. Engineering Mode

10. Engineering Mode
Engineering mode is designed to allow a service man/engineer to view and test the basic functions
provided by a handset. The key sequence for switching the engineering mode on is "2945#*# " Select.
Pressing END will switch back to non-engineering mode operation. Use Up and Down key to select a
menu and press 'select' key to progress the test. Pressing 'back' key will switch back to the original
test menu.
[1] All Auto test
[2] Baseband test
[2-1] Backlight
[2-1-1] Main Lcd Off
[2-1-2] Keypad Off
[2-2] LCD
[2-2-1] LCD Auto
[2-2-2] 65K LCD Test
[2-3] Camera
[2-3-1] Preview
[2-3-2] Settings
[2-3-3]DSP Up set
[2-3-4] Frame Up set
[2-4] Font
[2-4-1] Font8 X 16
[2-4-2] Font8 X 16i
[2-4-3] Font8 X 18
[2-4-4] Font8 X 18i
[2-4-5] Font8 X 18b
[2-4-6] INFORMAL_Font8 X 18
[2-4-7] Font10 X 9
[2-4-8] Font13 X 20
[2-5] Alert
[2-5-1] Vibrator
[2-5-2] Ring
[2-5-3] Effect Sound
[2-5-4] iMelody Sound
[2-5-5] EMS Sound
[2-5-6] Volume
[2-6] Serial Port
[2-6-1] Modem
[2-6-2] Irda
[2-7] Battery Info1
[2-8] Audio Gain
[2-8-1] Receiver
[2-8-1-1] Voice
[2-8-1-1-1] Link Volume
- 133 -