Engineering Mode - LG MG210 Service Manual

9. ENGINEERING MODE

Engineering mode is designed to allow a service man/engineer to view and test the basic functions
provided by a handset. The key sequence for switching the engineering mode on is "2945#*# "Select.
Pressing END will switch back to non-engineering mode operation. Use Up and Down key to select a
menu and press 'select' key to progress the test. Pressing 'back key will switch back to the original test
menu.
[1] All auto test
[2] Baseband test
[2-1] LED
[2-1-1] Indicator LED
[2-1-2] Backlight
[2-2] LCD
[2-2-1] LCD Auto
[2-2-2] Manual color Test
[2-2-3] LCD Color
[2-2-4] LCD Contrast
[2-2-5] Temperature Table
[2-3] Font
[2-3-1] Font 810
[2-3-2] Font 810i
[2-3-3] Font 810b
[2-3-4] Font 814
[2-3-5] Font 814i
[2-3-6] Font 814b
[2-3-7] Font 1018
[2-3-8] WapFont
[2-4] Alert
[2-4-1] Vibrator
[2-4-2] Ring
[2-4-3] Effect Sound
[2-4-4] iMelody Sound
[2-4-5] EMS Sound
[2-4-6] Volume
9. ENGINEERING MODE
[2-5] Serial Port
[2-5-1] Modem
[2-6] Battery Info1
[2-7] Audio Gain
[2-8-1] Receiver
[2-8-2] EarMic
[2-8-3] Loud Speaker
[2-8-4] HANDSFREE
[2-8-5] Default Value
[2-8-6] DAI Test
[2-8-7] Loopback Test
[2-8-8] Speaker Gain
[3] MG210 Vers
[4] ENG MODE
[4-1] Cell Environ
[4-2] Location Info
[4-3] Layer1 Info
[4-4] Change Frequency Band
[5] Call Timer
[6] Factory Default
- 107 -