Standalone Test; Setting Method; Com Port; Tx Test - LG T5100 Service Manual

11. Standalone Test

11.1 Setting Method

11.1.1 COM Port

In the "Dialog Menu", select the values as explained below.
·
Port : select a correct COM port
·
Baudrate : 38400
·
Leave the rest as default values

11.1.2 Tx Test

1. Selecting Channel
·
Select one of GSM or DCS Band and input appropriate channel.
2. Selecting APC
a. Select either Power level or DAC value.
b. Power level
·
Input appropriate value GSM (between 5~19) or DCS (between 0~15)
c. DAC value
·
You may adjust directly the power level with DAC values.

11.1.3 Rx Test

1. Selecting Channel
·
Select one of GSM or DCS Band and input appropriate channel.
2. Automatic Gain Control and Instrument Power level
See if the value of RSSI is close to -60dBm when setting the value 40 AGC Value Setting.
·
Normal phone should indicate the value of RSSI close to -60dBm.
- 135 -
11. Standalone Test