Engineering Mode - LG KF600d Service Manual

12. ENGINEERING MODE

Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided
by a handset. The key sequence for switching the engineering mode on is "2945#*#" Select. Pressing END
will switch back to non-engineering mode operation. Use Up and Down key to select a menu and press
'select' key to progress the test. Pressing 'back key will switch back to the original test menu.
[1] BB TEST
[1-1] Battery Info
[1-1-1] BattInfo
[1-2] Bluetooth Test
[1-2-1] Enter Test Mode
[1-2-2] OnOff Test
[1-2-3] Headset Test
[1-2-4] BT Test1
[1-2-5] BT Test2
[1-2-6] Xhtml Compose Print
[1-2-7] Xhtml Print Test
[2] Model Version
[2-1] Version
[3] Eng Mode
[3-1] Cell environ.
[3-2] PS Layer Info
[3-2-1] Mobility
[3-2-2] RadioRes
[3-2-1] Gprs
[3-3] Layer1 Info
[3-4] Reset Information
[3-5] Memory Configurarion
[3-6] MemGenConf
[3-7] MemAllUse
[3-8] MemDetUse
[3-9] MemDump
[3-10] Change Frequency Band
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
[4] Call Timer
[6] MF TEST
[5] Factory Reset
[6-1] All Auto Test
[6-2] Backlight
[6-2-1] BacklightOn
[6-2-2] BacklightOff
[6-3] Audio
[6-3-1] Audio Test
[6-4] Vibrator
[6-4-1] VibratorOn
[6-4-2] VibratorOff
[6-5] LCD
[6-5-1] Auto LCD
[6-6] Key pad
[6-7] Mic Speaker
[6-8] Camera
[6-8-1] Camera Main Preview
[6-8-2] FlashOn
[6-8-3] FlashOff
[6-8-4] CameraFlashBunning
[6-9] FM Radio
[6-9-1] FM Radio Test
[6-10] Touchpad Test
- 139 -
12. ENGINEERING MODE
[7] Network selection
[7-1] Automatic
[7-2] GSM850
[7-3] EGSM
[7-4] DCS
[7-5] PCS
LGE Internal Use Only