Ptz Control; Perform Ptz Preset Viewing - Planet NVR-810 User Manual

Then select dwell interval from the drop-down menu
Finally click "Start" to start sequence viewing
Click "All Channels" to quickly select all available channels and start
sequence view in single-view mode.
Click "All Groups" to quick select all available groups and start sequence view
in quad-view mode.
Or simply select the desired channels and press "Start" to start sequence view.

4.4 PTZ Control

PTZ control provides functions to pan, tilt, zoom a PTZ camera as well as the
ability to adjust camera focus and iris.
Camera(s) that are currently being selected for live viewing will be listed in the PTZ
drop-down menu. Simply select a camera then use the PTZ control panel to control
the camera.
The bar shown below allows you to control the pan/tilt speed.

4.5 Perform PTZ Preset Viewing

T here are three functions provided in the "Preset" section:
. Perform preset point viewing of a particular camera.