Connect To The Nvr; Use Device Search Utility - Planet NVR-810 User Manual

Hide thumbs Also See for NVR-810:

Table of Contents

3. Connect to the NVR

There are various ways you can connect to the NVR and below are the

suggested methods for different network setup:

The NVR is placed in a network with a DHCP server: Connect to the NVR

by using "Device Search" Utility.

The NVR is placed in a network without DHCP server (or you are

connecting to it directly): Access NVR with its default IP (192.168.0.20).

If the NVR is placed in a corporate network or a local area network where a

DHCP server is already presented, please install the "Device Search" utility from

the bundled CD disk.

To begin, launch the "Device Search" utility from the CD and proceed with the

installation.

Table of Contents

Nvr-1610