PTZ control Procedure
a) Select the camera (which PTZ camera is connected) to control PTZ using UP, RIGHT, DOWN, LEFT
buttons of front panel in your DVR.
b) Press ENTER button to select PTZ mode. PTZ MODE OSD will be displayed on upper
right corner of monitor.
c) Use UP, DOWNbutton for tilt movement of PTZ camera, LEFT(4), RIGHT(2) for pan movement and
(FF ▶▶) and (RR ◀◀) buttons for zoom IN and zoom OUT.
d) To escape PTZ control mode, press ENTER button or any button. Then the PTZ MODE
OSD on upper right corner of monitor will be disappeared.
ë
Note
Before using PTZ control mode, please check that right
selection of PTZ protocol in PTZ type of DISPLAY SETUP is
done
36